| Info: | Timeout [usec] |
| Data type: | UDINT |
Description:
To transfer a parameter value to the ACOPOS, the NC manager first sends a Write Request frame from the PLC to the ACOPOS. This error is displayed if the NC manager could not read the corresponding acyclic Write Response frame from the ACOPOS using the POWERLINK library within a specific amount of time after the POWERLINK send function call was made.
Note:
The INFO is displayed from V1.142 on.
Reaction:
Resets the interface of the corresponding acyclic POWERLINK write channel.
Cause/Remedy:
Overload, malfunction or interruption of the network connection or ACOPOS failure.
See also error number 1012.